Garbage Disposal Repair: 4 Garbage Disposal Problems And How To Fix Them
Garbage disposal problems are annoying, aren’t they? While this is the case, they come about every now and then.
When they result, commercial garbage disposal repair professionals recommend that you fix them as soon as possible for you to continue enjoying a problem-free unit. Here are some of the most common garbage disposal issues and how to fix them:
Garbage disposal clogs
They are probably the most common ones. Clogs come about when you go for a long time without cleaning your unit. The clogs will also result when you dump large pieces of food in the unit.
In addition to the inconvenience of having a malfunctioning garbage disposal, having a clogged unit also makes your home smelly as the clogging materials tend to be stuffy. This is because they have been stuck in one place for a long time.
How can you fix this problem? All you need to do is to get rid of the clogging material. Before you contact a repair professional, try getting rid of the clogging material by yourself. You can do this using large amounts of water.
If you have the skills, you can try unclogging the unit using a plunger. Are the issues still present even after doing all this? It’s time to contact a repair professional to help you out. The professional will pull up the extra, unbroken food leaving your lines in top condition.
Prevention is always better than cure; therefore, to prevent the problems from coming about in the future, consider installing a strainer in the drain. This will prevent large chunks of food from falling into the garbage disposal.
Failure of the unit to turn on
You will have a fully functioning unit one day and on turning it on the following day, it won’t turn on. This can be brought about by many factors. One of the factors is failure of the unit to receive power.
Before you get into panic mode and run around hiring a professional who will cost you money, you should check whether the unit is plugged in. The plug might have simply been knocked out and all you need to do is to replace it.
Is the unit plugged in but still it won’t turn on? Check the circuit breaker. It’s common for the circuit breaker to flip thus preventing the unit from getting power. While at it, check the outlet and ensure that it isn’t dead.
If everything is in place but still the unit won’t start, you should contact a professional to undertake a thorough inspection and find the source of the problem.
Weird noises coming from the unit
Is your garbage disposal humming, making loud noises, stops then starts? You have a problem that you need to address. Loud noises come about due to many reasons. You will experience the noises when there is something lodged in the “flywheel.”
If this is the case, you only need to remove it. You may need to open up the unit to access the lodged material. Some people tend to stick their hand down the garbage disposal. Don’t do this as you can easily damage your hand.
The unit will also make noises when the moving parts are old or damaged. How old is your unit? Is it more than 10 years? The parts are most likely too old and it’s time to replace them.
Leaking of the unit
A properly working unit should never leak; therefore, when yours is leaking, you need to address the problem immediately. In most cases, the unit leaks at the bolts. All you need to do is to tighten the bolts and ensure there are no more leaks.
Is it still leaking after the tightening? Loosen the bolts and push the sink flange up. You should then go ahead and apply plumber’s putty to the area between the sink and flange.
Doing this will fix most of the leaks that might be there. If the leaks aren’t resulting from the bolts, don’t handle the issue as you might make it worse. The best way out is to hire a commercial appliance repair Northern VA professional to fix it.